Description
Technical Parameters
HFC-227ea Gas fire fighting equipment FM200 Fire System
Introduction:
When the control mode selection key on the automatic fire alarm and fire extinguishing controller is set to the "auto" position, the fire extinguishing system is under automatic control. When a fire occurs in the protection area, the temperature and smoke detectors will send out a fire signal through the automatic fire alarm and extinguishing control After the logic analysis of the device, it sends out a combined sound and light alarm signal, and sends out a linkage command at the same time to close the linkage device. After a delay, a fire extinguishing command is issued, the starting valve is opened to release the starting gas, and the starting gas is opened through the control gas pipeline valves and container valves release the fire extinguishing agent and implement fire extinguishing.Advantages:
★Very swift fire suppression and cost effective engineering systems provide maximum protection.Reach extinguishing level ≤10s.
★Safe to people. People is safe when exposed at the FM200 gas discharge level. Low extinguishing concentration. Nearly no obscure to vision in person evacuation.
★Easy to clean. No residue left, and minimize damage to sensitive equipment.
★Environment friendly and Safe for humans. Zero ozone depletion potential and zero global warming potential. Sustainable Technology provides environmentally friendly solutions.
★Clean and leaves no residue, safe to discharge into occupied space.Simple installation, with small storage space.
★There is no additional damage.
★Proven Reliability – tested on a variety of detection and control options
★Quick blackout.
Specification:
No. | Specification | Technical Parameter | |
1 | Filling pressure | 4.2Mpa | 5.6Mpa |
2 | Scale of Protective region for one zone | Area：max single-zone is 800m² volume：max single-zone is 3600m³ | |
3 | Spraying time | 10s | |
4 | Filling density | ≤950kg/m3 | ≤1080kg/m3 |
5 | Power | DC24V/1.6A | |
6 | Nitrogen Pressure of Driving Device | 6.0±1.0Mpa(20℃) | |
7 | Condition of reserving room for container | temperature: -10~50℃, relative humidity: ≤97% | |
8 | Max working pressure | 5.3Mpa | 8.0Mpa |
9 | Min working pressure | 4.2Mpa | 4.6Mpa |
10 | Capacity | 90L, 120L, 150L, 180L | |
Accessories List:
Working Principle:
HFC-227ea Gas fire fighting equipment FM200 Fire System are generally used in conjunction with fire detectors, fire alarm fire extinguishing controllers, emergency start/stop buttons, sound and light alarms, deflation indicators and other fire fighting equipment. When a fire occurs in the protection area, the temperature and smoke detectors will send out a fire signal. After the logic analysis of the automatic fire alarm and extinguishing controller, it will send out a sound and light composite alarm signal, and at the same time send out a linkage command to turn off the linkage equipment. After a delay time, a fire extinguishing command is issued, the solenoid valve driver is opened, the container valve is opened, the fire extinguishing agent is released, and the fire is extinguished; if the duty officer discovers a fire, he can press the emergency start button outside the protective area door to implement the fire extinguishing operation ; There is also a manual button on the solenoid valve driver, and mechanical emergency manual operation can also be used to extinguish fire in an emergency.Production Process
Working Diagram:
Packing & Delivery
China CCC Certificated FM200 Total Flooding Fire System, HFC-227ea Gas fire fighting equipment FM200 Fire System
Application
Application :
Bank vaults | Libraries | Rare book stores | Electronic data processing | Telephone exchanges | Studios | Communication centers/room | Transformer and switch-rooms | Control rooms | Test laboratories | Flammable liquid storage | Power distribution rooms | Generator rooms | Chemical combustibles warehouses | Treasures warehouses | Archives | Libraries | Offshore oil production platforms | Underground projects | Electronic computer rooms