Hangzhou PRI-SAFETY Fire Technology Co., Ltd. is known as one of the most professional manufacturers and suppliers of various safety products in China. If the cabinet type fk-5-1-12 total flood system meets your requirement, welcome to buy quality equipment made in China here from our factory. Our factory will offer you one stop service and one year warranty.
Products Description
Cabinet Type FK-5-1-12 System Product Introduction
FK-5-1-12 fluid is a sustainable fire extinguishing clean agent that helps protect high value assets. It is a waterless fire suppressant designed to replace high GWP HFCs like FM-200.
FK-5-1-12 fluid stops the combustion process by absorbing heat. As part of an advanced fire suppression system, it quickly extinguishes the fire.
FK-5-1-12 systems use fewer cylinders under lower pressure than inert gas systems - requiring less space, less maintenance and less structural reinforcement.
When you choose FK-5-1-12 as your clean agent, you'll need to specify it as part of a complete fire suppression system. The system you select is based on the agent. These original equipment manufacturers (OEMs) understand the unique chemistry of FK-5-1-12 and have engineered their listed or approved systems to optimize its extinguishing performance and protect your critical assets.
Combined with extinguishing device and electronic accessories, the whole system can be actuated automatically. It can monitor the situation of protective region through detectors and then it can also start the extinguishing device through solenoid actuator automatically. So the whole system can achieve automation totally. Therefore, it can avoid that there is no one who notice the fire when it happens and also it saves much money for employment to supervise the protective area.
Products Advantage
Cabinet Type FK-5-1-12 Total Flood System Advantages
▶ It can be used for all kinds of class fires except metal fire. And it is clean agent. There is no residue and pollution after extinguishing.
▶ FK-5-1-12 extinguishing system is special for critical assets or device. It will have no damage for your property. It is very efficient for you to protect your possession.
▶ All agent will be discharged in short 10 seconds. Then it will be flooding overall.
▶ It has time-delay mechanism. It is around 2 minute. When fire happens, there is enough time left to evacuate people from hazardous place.
Products Parameter
Cabinet Type FK FK-5-1-12 System Product parameter
Filling pressure ••••••••••••••••••••••▷▷▷▶ 2.5Mpa
Relief pressure ••••••••••••••••••••••▷▷▷▶ 5.0±0.225Mpa
Spraying time •••••••••••••••••••••••▷▷▷▶ ≤10s
Working temperature •••••••••••••▷▷▷▶ 0～50℃
Power •••••••••••••••••••••••••••••••••▷▷▷▶ DC24V/1.6A
Max working pressure •••••••••••••▷▷▷▶ 4.2Mpa
|
No. |
model |
max filling weight of agent(Kg) |
outline dimension length*width*height(mm) |
||||
|
⑴ |
PRI/40 |
38 |
450*400*1450 |
||||
|
⑵ |
PRI/70 |
67 |
500*450*1650 |
||||
|
⑶ |
PRI/90 |
85 |
500*400*1650 |
||||
|
⑷ |
PRI/100 |
95 |
500*400*1650 |
||||
|
⑸ |
PRI/120 |
114 |
550*550*1900 |
||||
|
⑹ |
PRI/150 |
143 |
550*550*1900 |
||||
|
⑺ |
PRI/180 |
173 |
600*550*1900 |
||||
Products Compositions
Cabinet Type FK-5-1-12 System Compositions
Cabinet type of FK-5-1-12 automatic fire suppression system is mainly composed by two parts: Extinguishing devices and Electrical accessories.
Here attached below is complete composition of whole system:
Cabinet Type FK-5-1-12 System Simulated diagram
Below attached is one mimic diagram of single cabinet type of FK-5-1-12 automatic fire suppression system.
Products Application
Cabinet Type FK-5-1-12 System is widely used in various scenarios, including but not limited to
Ideal fire suppression for challenging industries:
Data centers ••••••••••••••••••••••••••••••••▶ Help keep data centers protected from fire with minimal downtime and cleanup.
Marine ••••••••••••••••••••••••••••••••••••••▶ Help protect engine rooms and control rooms of ships at sea, with fast air-shipping of cylinders and quick system recharge.
Aviation •••••••••••••••••••••••••••••••••••••▶ Help protect people and critical assets in air traffic control towers, hangars and on the flight line.
Oil and gas ••••••••••••••••••••••••••••••••••▶ Help put out fires quickly in highly volatile (Class B) environments, including offshore oil platforms.
Museum, art and archives ••••••••••••••••••▶ Help safeguard precious art, archives and artifacts from both fire and water damage.
Transit •••••••••••••••••••••••••••••••••••••••▶ Help reduce the risk of fire in rail switching stations and on electric-powered transit.
Medical centers •••••••••••••••••••••••••••••▶ Help protect workers and equipment in surgical suites, MRI rooms, storage areas and data centers.
Industrial ••••••••••••••••••••••••••••••••••••▶ Help protect your control rooms and production assets to reduce downtime.
Power generation and transmission •••••▶ Help protect critical systems in generating facilities, substations and control rooms.
......
Products Progress
Packing & Delivery
Company Profile
PRI-SAFETY factory was built in 2005, is a national high-tech enterprise focusing on the research, design and manufacture of automatic fire suppression systems and fire fighting equipment.
And the main products we produce include : Vehicle and Mechanical Equipment Automatic Fire Suppression System, Kitchen Fire System, Heptafluoropropane Gas Fire Suppression System, FM200/FK-5-1-12 Tool Flooding System, Water Mist Fire System, Compressed Air Foam Equipment(CAFS), Fire Trace Fire system, etc
We not only produce fire system but also design them and provide various fire solution, we have a professional technical team to help us with that, and also perfect aftersale-service.
Any question, like installlation, feel free to contact us, we are always online. And we has passed ISO9001:2015 quality management system certification, and its has CE and EN
certification, UN ECE R107 certificate for vehicle safety.
Our address
A-413, MeiDu Plaza, GongShu District, Hangzhou, China.
