Hangzhou PRI-SAFETY Fire Technology Co., Ltd. is known as one of the most professional manufacturers and suppliers of various safety products in China. If the novec 1230 fire suppression system | fk-5112 total flooding clean agent solution meets your requirement, welcome to buy quality equipment made in China here from our factory. Our factory will offer you one stop service and one year warranty.
To meet worldwide project requirements, our company offers six fully engineered fire-suppression configurations, covering all combinations of:
System Type: Pipe Network / Cabinet Type
Cylinder Material: HP345(GB/T6653) Steel / Stainless Steel
Clean Agent: FM200 / Novec 1230
All six models are available, and we provide one-stop service including project design, OEM manufacturing, onsite installation assistance, and online/offline technical training.
⭐ This product page refers to the Link 2 ➡ Pipe Network + HP345(GB/T6653) Steel Cylinder + Novec1230 (FK-5112) Fire Agent
Products Description
Novec 1230 Fire Suppression System
Pipe Newwork total flooding systems for single-room or multi-rooms.
How the Novec 1230 Fire Suppression System Works?
Fire Detection
Smoke and heat detectors identify fire at an early stage.
Control and Alarm
The gas fire extinguishing control panel activates audible and visual alarms and initiates the release sequence.
Agent Discharge
The solenoid or pneumatic actuator opens the cylinder valve, releasing Novec 1230 gas into the protected area.
Total Flooding Fire Suppression
Novec 1230 gas reaches extinguishing concentration within seconds, suppressing fire quickly and effectively.
Clean and Safe Protection
The system leaves no residue, causes no corrosion, and allows rapid recovery after discharge.
Novec 1230 System Main Components
Some accessories are available in multiple models.
We also offer fire alarm fire systems together.
Products Specification
1. Novec 1230 Fire Suppression System (Pipe Network Type) Specification
| Item | Specification |
| System Type | Pipe Network Total Flooding Novec 1230 Fire Suppression System |
| Fire Suppression Agent | Novec 1230 (FK-5-1-12) |
| Cylinder Material | HP345(GB/T6653) Steel or 37Mn |
| Cylinder Capacity Options | 16L / 32L / 40L / 52L / 70L / 82.5L / 90L / 100L / 120L / 140L / 150L / 180L / 250L / 300L / 345L / 450L / 500L |
| Working Pressure | 4.2 MPa (standard) / 5.6 MPa / 8.0 MPa (optional) |
| Discharge Time | ≤ 10 seconds |
| Design Concentration | 7.0% – 9.0% (depending on application) |
| Operating Temperature | -10°C to +50°C |
| System Activation | Automatic / Manual / Emergency Mechanical |
| Nozzle Type | 180°or 360° |
| Protected Area | Single zone or multi-zone protection |
| System Service Life | ≥ 20 years (with proper maintenance) |
2. Advantages of Novec 1230 Fire Suppression System
* Clean agent with zero residue – no damage to electronics
* Fast fire extinguishing – minimizes asset loss and downtime
* Safe for occupied spaces – suitable for personnel areas
* Flexible pipe network design – ideal for complex layouts
* Scalable system configuration – supports large projects
* High reliability – certified cylinders and valves
* Long service life – industrial-grade components
Products Project Shows
Products Applications
Idea for, but not limited to:
* Data centers and IDC facilities
* Server rooms and UPS rooms
* Electrical switchgear rooms
* Power control rooms
* Telecommunication facilities
* Industrial automation systems
* Petrochemical control rooms
* Archives, libraries and laboratories
Packaging & Delivery
Cylinders secured with protective frames
Valves and accessories packed individually
Export-grade wooden pallet
Palletized packaging available for bulk shipments
Suitable for sea, air and land transportation
FQA
Novec 1230 Fire Suppression System – Frequently Asked Questions (FAQ)
Q1: What is an Novec 1230 / FK-5-1-12 fire suppression system?
An Novec 1230 fire suppression system is a total flooding clean agent fire extinguishing system that usesFK-5-1-12 gas to suppress fire quickly and effectively.
It extinguishes fire by absorbing heat and interrupting the chemical reaction of combustion, without leaving residue or damaging sensitive equipment.
Q2: What is Novec 1230 made of?
Novec 1230 is made of FK-5-1-12, a fluorinated ketone clean agent originally developed by 3M.
It is a colorless, electrically non-conductive liquid stored as a fluid and discharged as a gas.
Q3: Is Novec 1230 environmentally friendly?
Yes. Novec 1230 is considered one of the most environmentally friendly clean agents available.
Ozone Depletion Potential (ODP): 0
Global Warming Potential (GWP): < 1
Atmospheric lifetime: about 5 days
This makes it suitable for projects with strict environmental regulations.
Q4: Is Novec 1230 safe for occupied spaces?
Yes. Novec 1230 systems are safe for normally occupied areas when designed according to NFPA 2001 standards.
The design concentration is well below the NOAEL, providing a high safety margin for personnel.
Q5: What is the difference between Novec 1230 and FM200 systems?
Novec 1230 system:
Lower environmental impact
Stored as a liquid, vaporizes on discharge
Preferred for green building projects
FM200 system:
Widely used and cost-effective
Higher GWP compared to Novec 1230
Strong global availability
Both systems are clean agents and suitable for sensitive equipment protection.
Q6: Does Novec 1230 leave residue after discharge?
No. Novec 1230 is a clean agent and leaves no residue, no moisture and no corrosive by-products.
After discharge, the protected area can be quickly returned to normal operation.
Q7: How fast does a Novec 1230 system suppress fire?
A Novec 1230 fire suppression system typically discharges the agent and reaches the required extinguishing concentration within 10 seconds, ensuring fast and effective fire suppression.
Q8: Where are Novec 1230 fire suppression systems commonly used?
Novec 1230 systems are widely used in:
Data centers and server rooms
Electrical and control rooms
Telecommunication facilities
Museums, archives and libraries
Laboratories and clean rooms
Financial institutions and command centers
Q9: Can a Novec 1230 system protect multiple rooms?
Yes. A pipe network Novec 1230 system with selector valves can protect multiple rooms using a single cylinder group.
The agent is released only into the area where fire is detected.
Q10: How is the required Novec 1230 agent quantity calculated?
The required agent quantity is calculated based on:
Room volume
Design concentration
Minimum room temperature
Enclosure integrity and leakage
We provide professional system design and agent calculation as part of our one-stop service.
Q11: What system configurations are available for Novec 1230?
Novec 1230 systems are available in:
Pipe network type (for large or complex spaces)
Cabinet type (for small rooms or single areas)
Single-zone or multi-zone systems
Q12: What working pressure options are available?
Depending on system design, Novec 1230 cylinders are available with:
4.2 MPa
5.6 MPa
8.0 MPa
Higher pressure options upon request
Q13: What standards do Novec 1230 systems comply with?
Novec 1230 fire suppression systems are designed in accordance with:
NFPA 2001 (Clean Agent Fire Extinguishing Systems)
ISO and EN standards
Local fire protection regulations
Q14: Do you provide system design and technical support?
Yes. We provide a complete one-stop solution, including:
System design and engineering
Customized manufacturing
Installation guidance
Commissioning support
Technical training (online and on-site)
Q15: Can you provide OEM or customized Novec 1230 systems?
Yes. We support OEM / ODM services, including:
Customized cylinder sizes
Private labeling
Project-specific configurations
Pressure and layout customization
Q16: What maintenance is required for a Novec 1230 system?
Routine maintenance includes:
Visual inspection of cylinders and valves
Pressure and weight checks
Control panel and detection system testing
Annual inspection according to local standards
Q17: How long is the service life of a Novec 1230 system?
With proper installation and maintenance, a Novec 1230 system typically has a service life of 15–20 years, making it suitable for long-term protection projects.
Q18: How long is the delivery time for a Novec 1230 system?
Typical production lead time is 20–25 days, depending on system configuration and order quantity.
Large or customized projects may require additional time.
Q19: Can you provide drawings and technical documents before ordering?
Yes. We can provide:
System layout drawings
Piping and nozzle distribution drawings
Wiring diagrams
Technical datasheets
Operation and maintenance manuals
Q20: How do I choose between Novec 1230 and FM200?
If your project prioritizes environmental performance and sustainability, Novec 1230 is an excellent choice.
If cost efficiency and widespread availability are more important, FM200 may be more suitable.
Our engineers can help you choose the best solution based on your project requirements.
About Us
Why Choose Our PRI-SAFETY Novec 1230 Fire Suppression System
One-Stop Fire Protection Solution from Design to Training
Our Novec 1230 Fire Suppression System is a proven total flooding clean agent solution designed for fast and reliable fire protection in large and complex enclosed spaces.
We provide a complete one-stop service, covering project design, customized manufacturing, installation support and technical training, ensuring smooth delivery from concept to operation.
This system uses FK-5-1-12, a clean, residue-free and electrically non-conductive fire extinguishing agent, widely applied in data centers, electrical rooms and industrial control environments.
One-Stop Service Capability
We are not only a manufacturer, but a full-solution provider of Novec 1230 fire suppression systems.
* Project Design & Engineering
System design according to NFPA 2001, ISO, EN and local standards
Novec 1230 gas quantity calculation and room integrity analysis
Pipe network layout and nozzle distribution drawings
Engineering design for single-room and multi-room total flooding systems
* Customized Manufacturing
In-house production of Novec 1230 cylinders, valves, manifolds, hoses and nozzles
4.2MPa / 5.6MPa / 8.0MPa working pressure options
OEM / ODM customization and private labeling available
ISO9001 quality management with CCC certified components
* Installation & Commissioning Support
On-site installation guidance or complete installation service
System commissioning, pressure testing and functional verification
Remote technical support for overseas Novec 1230 projects
* Technical Training (Online & On-site)
Online technical training for distributors and contractors
On-site training for large-scale fire suppression projects
Operation, maintenance and troubleshooting guidance
Complete technical documents, wiring diagrams and manuals
Get a Customized Novec 1230 Fire Suppression Solution
Whether you need protection for a single room or a complex multi-room facility, our engineering team can provide a customized Novec 1230 fire suppression system based on your site conditions and local standards.
📩 Contact us today to receive system drawings, technical support and a detailed quotation.