Customized Design High Pressure Water Mist Fire System

Customized Design High Pressure Water Mist Fire System

Water Mist Fire Suppression system 1. Background A water mist system is a fire protection system which uses very fine water sprays (i.e. water mist). The small water droplets allow the water mist to control, suppress or extinguish fires by: *Cooling both the flame and surrounding gases by...
Send Inquiry
Chat Now
Description
Technical Parameters

Products Description

 

12-1000x1000

The high-pressure fine water mist fire extinguishing system uses a dedicated pump set to pressurize water to 10MPa or more, and then sprays it out through specially designed fine water mist nozzles. After coming into contact with the flame, these fine water mists rapidly vaporize, absorbing a large amount of heat and causing a sudden drop in the temperature of the burning material.


Meanwhile, the water vapor produced by vaporization will dilute the oxygen concentration and inhibit the combustion reaction. The fine water mist can also block heat radiation and prevent the spread of fire, thus achieving efficient fire suppression.
Water Mist Fire System is a Fixed Completely System, Designed with Water Mist tank, Nitrogen Gas Propellant Bottles, Pressure Regulator, Safety Valve, Nozzles, Detectors, Fire Alarm, Control Panel, etc. The System can be activated by detectors automatically, and also by hand.

Products Specification

Pump Pressurized Type Water Mist Fire System

Single Pump, 112L/Min, 14Mpa, 30KW
Code Number
Working Pressure
Flow(L/Min)
Pump Speed(R/Min)
Dimension (mm)
Note
WM/PRI-112/14
14Mpa
112
1470
2200x1200x2000
One Work One Reserve
WM/PRI-224/14
14Mpa
224
1470
2650x1200x2000
Two Work One Reserve
WM/PRI-336/14
14Mpa
336
1470
2650x1200x2000
Three Work One Reserve
WM/PRI-448/14
14Mpa
448
1470
3100x1200x2000
Four Work One Reserve
WM/PRI-560/14
14Mpa
560
1470
3100x1200x2000
Five Work One Reserve
WM/PRI-672/14
14Mpa
672
1470
3550x1200x2000
Six Work One Reserve
WM/PRI-784/14
14Mpa
784
1470
3550x1200x2000
Seven Work One Reserve

Pump Pressurized Type Water Mist Fire System

Single Pump, 134L/Min, 16Mpa, 45KW
Code Number
Working Pressure
Flow(L/Min)
Pump Speed(R/Min)
Dimension(mm)
Note
WM/PRI-134/16
16Mpa
134
1470
2200x1200x2000
One Work One Reserve
WM/PRI-268/16
16Mpa
268
1470
2650x1200x2000
Two Work One Reserve
WM/PRI-402/16
16Mpa
402
1470
2650x1200x2000
Three Work One Reserve
WM/PRI-536/16
16Mpa
536
1470
3100x1200x2000
Four Work One Reserve
WM/PRI-670/16
16Mpa
670
1470
3100x1200x2000
Five Work One Reserve
WM/PRI-804/16
16Mpa
804
1470
3550x1200x2000
Six Work One Reserve
WM/PRI-938/16
16Mpa
938
1470
3550x1200x2000
Seven Work One Reserve

Pump Pressurized Type Water Mist Fire System

Single Pump, 168L/Min, 13Mpa, 45KW
Code Number
Working Pressure
Flow(L/Min)
Pump Speed (R/Min)
Dimension (mm)
Note
WM/PRI-168/13
13Mpa
168
1470
2200x1200x2000
One Work One Reserve
WM/PRI-336/13
13Mpa
336
1470
2650x1200x2000
Two Work One Reserve
WM/PRI-504/13
13Mpa
504
1470
2650x1200x2000
Three Work One Reserve
WM/PRI-672/13
13Mpa
672
1470
3100x1200x2000
Four Work One Reserve
WM/PRI-840/13
13Mpa
840
1470
3100x1200x2000
Five Work One Reserve
WM/PRI-1008/13
13Mpa
1008
1470
3550x1200x2000
Six Work One Reserve
WM/PRI-1176/13
13Mpa
1176
1470
3550x1200x2000
Seven Work One Reserve

 

Working Principle

 

Water Mist Fire System are generally used in conjunction with fire detectors, fire alarm fire extinguishing controllers, emergency start/stop buttons, sound and light alarms, deflation indicators and other fire fighting equipment. When a fire occurs in the protection area, the temperature and smoke detectors will send out a fire signal. After the logic analysis of the automatic fire alarm and extinguishing controller, it will send out a sound and light composite alarm signal, and at the same time send out a linkage command to turn off the linkage equipment. After a delay time, a fire extinguishing command is issued, the solenoid valve driver is opened, the container valve is opened, the fire extinguishing agent is released, and the fire is extinguished; if the duty officer discovers a fire, he can press the emergency start button outside the protective area door to implement the fire extinguishing operation ; There is also a manual button on the solenoid valve driver, and mechanical emergency manual operation can also be used to extinguish fire in an emergency.

 

Accessories

Accessories

Application

1. High-end commercial venues: Such as shopping malls, office buildings, hotels and other places with dense populations and luxurious decoration, this system can prevent water stains from damaging expensive items and decoration during fire extinguishing, protecting property safety. At the same time, it will not produce harmful gases, ensuring personnel safety.

2. Data centers and computer rooms: For data centers and computer rooms that store a large number of precision electronic devices, traditional fire extinguishing methods may cause damage to the equipment. The high-pressure fine water mist fire extinguishing system can not only quickly put out fires but also will not cause secondary damage to the equipment, ensuring data security and business continuity.
3. Transportation hubs: Airports, railway stations, subway stations and other transportation hubs have large Spaces and frequent personnel flow. This system can precisely extinguish fires in different zones, respond quickly to fire situations, and reduce the impact of fires on traffic order.
4. Cultural ancient buildings: When protecting ancient buildings, the high-pressure fine water mist fire extinguishing system, with its environmentally friendly and low-loss features, can effectively put out fires without damaging the original cultural relics, thus safeguarding historical and cultural heritages.
5. Industrial sites: Such as petrochemical, power, pharmaceutical and other industrial fields, in the face of complex environments with flammable, explosive and high temperatures, the system can provide protection for local key areas, effectively controlling the spread of fire.

Packing&Shipping

11

 

We are known as one of the most professional manufacturers and suppliers of various safety products in China. If the customized design high pressure water mist fire system meets your requirement, welcome to the quality equipment made in China. Our factory will offer you one stop service and one year warranty.

Hot Tags: customized design high pressure water mist fire system, China, manufacturers, suppliers, factory, made in China