Hangzhou PRI-SAFETY Fire Technology Co., Ltd. is known as one of the most professional manufacturers and suppliers of various safety products in China. If the water mist fire system gas cylinder type for ess container meets your requirement, welcome to buy quality equipment made in China here from our factory. Our factory will offer you one stop service and one year warranty.
Cylinder Type Water Mist Fire Suppression System
Products Description
Cylinder Type High Pressure Water Mist Extinguishing System-an efficient, clean, and compact fire suppression solution specifically engineered for fast response and minimal disruption in sensitive or confined environments.
This system leverages pre-pressurized cylinders to deliver high-pressure mist, making it ideal for applications where space, simplicity, and system readiness are critical.
Unlike pumped systems that rely on electric or diesel-driven pumps, the cylinder type system stores water and propellant gas-usually nitrogen-in pressurized cylinders. Upon activation, the high-pressure gas forces the water through specialized mist nozzles, creating ultra-fine droplets that suppress fires rapidly and efficiently.
The Water Mist Fire Suppression System is an advanced firefighting solution that utilizes ultra-fine water droplets to effectively control and extinguish fires. Its design minimizes water usage while maximizing heat absorption and oxygen displacement, making it ideal for sensitive environments like museums and data centers. With its versatility in combating various fire classes and reduced risk of water damage, this system offers an efficient and environmentally friendly approach to fire safety.
Reduced Water Usage: Uses significantly less water compared to traditional systems.
Minimal Damage: Lower risk of water damage to sensitive equipment or materials.
Versatility: Effective on various types of fires, including Class A (ordinary combustibles), Class B (flammable liquids), and even Class C (electrical) fires.
Environmental Impact: Often considered more environmentally friendly due to reduced water consumption and potential for using additives.
Water Mist System Advantages
• Compact and Self-Contained: No pump room or power supply needed-ideal for remote or space-limited areas.
• Rapid Response: Instant pressurized discharge ensures immediate suppression
• Clean and Environmentally Friendly: Pure water mist-no harmful chemicals, safe for people and equipment.
• Low Maintenance: Fewer moving parts compared to pumped systems, with easy cylinder replacement.
• Scalable and Modular: Cylinder Type Water Mist System can be installed as single-zone or multi-zone systems.
Reduced Water Usage: Uses significantly less water compared to traditional systems.
Minimal Damage: Lower risk of water damage to sensitive equipment or materials.
Versatility: Effective on various types of fires, including Class A (ordinary combustibles), Class B (flammable liquids), and even Class C (electrical) fires.
Environmental Impact: Often considered more environmentally friendly due to reduced water consumption and potential for using additives.
Technical Parameter
| Models | 1. ADG Container | 2. EDG Container |
| Water Mist Working Pressure | 10MPa | 10MPa |
| Water Mist Fire Sytem Capacity | 8x80L Water Bottles
8x80L N2 Gas Bottles |
4x80L Water Bottles
4x80L N2 Gas Bottles |
|
Water Bottle Working Pressure |
20MPa | 20MPa |
| N2 Gas Bottle Working Pressure | 20MPa | 20MPa |
| Nozzle Flow Rate | 10L/min, K=1.0 | 8L/min, K=0.8 |
| Nozzle Quantity | 6pcs | 4pcs |
| Skid Dimension | 800X3400X2080mm | 800X1700X2080mm |
| Pipe and Valve Material | SUS316 High Pressure | SUS316 High Pressure |
| Pressure Gauge and Solenoid Valve | Explosion-Proof | Explosion-Proof |
Cylidner Specification:
Cylinder Capacity, 80L
Cylinder Dimensions,Dia.267mm , Length 1730mm
Working Pressure,200Bar
Test Pressure,250Bar
Material,Stainless Steel
Frame Kit
Professional Design Support - Compliant with NFPA 2001
PRI-SAFETY Supply Project Design, Technology Solution, Manufacturer & Customization, supplied, Installation Instruct&Training, tested, commissioned, and certified
- Free Room Volume Calculations (Determining exact agent weight).
- Pipe Network Hydraulic Analysis (Ensuring balanced pressure).
- Customized CAD Layouts (Tailored to your server room height and floor).
Project Design Example
1ADG Container, 3D Design.
ADG Container CAD Drawings
*Water Mist Skid, 8*80L Water Bottle, 8*80L N2 Bottle.
Water Mist Application
Why this industry suitable to use Water Mist System?
Why Use Water Mist: * Minimal Water Damage: Uses up to 90% less water than traditional sprinklers. The ultra-fine mist evaporates instantly upon contact with heat, preventing "pooling" water from frying adjacent healthy servers.
Smoke Scrubbing: The mist particles actively trap smoke and soot, preventing acidic combustion byproducts from corroding sensitive PCB boards.
Why use Water Mist:
Why Water Mist:
Rapid Cooling: Power generators operate at high temperatures. Water mist has a massive surface area that absorbs heat instantly, preventing structural deformation of the equipment.
Three-Dimensional Suppression: It behaves like a gas (Total Flooding), allowing it to wrap around the complex geometry of an engine or turbine to kill hidden fires.
.
Why Use Water Mist:
Weight & Space Saving: Weight is critical on ships. Water mist systems use significantly smaller tanks and pipes compared to heavy deluge systems, increasing the ship's fuel efficiency.
Continuous Supply: Unlike gas systems (which only have one "shot"), a pump-based water mist system can run as long as there is water, providing endless protection at sea.
Why Use Water Mist:
Flashover Prevention: Cable fires spread fast and hot. Water mist blocks radiant heat transfer, preventing the fire from "jumping" to the next cable tray.
Oxygen Displacement: In the confined space of a tunnel, the rapid expansion of water into steam (1,600x volume) starves the fire of oxygen without the risk of toxic gas buildup.
Packing and Shipping
Water Mist System FAQ
Q1: What is water mist fire suppression system?
Q2: What is water mist system made of?
Q3: What is the difference between water mist and FM200 systems?
Q4: How fast does a water mist system suppress fire?
Q5: Where are water mist fire suppression systems commonly used?
Q6: How is the required water mist quantity calculated?
Q7: What standards do water mist systems comply with?
Reliable systems comply with international standards such as NFPA 750, VdS, FM 5560, and CE (EN 14972) to ensure safety, performance, and hardware reliability.
Q8: How do I choose between cylinder type water mist and pump water mist system?
Choose Cylinder Type (Gas-driven) for small, independent rooms (e.g., small server rooms) for easy installation. Choose Pump Type (Motor/Diesel) for large-scale buildings or multiple zones requiring continuous water supply.
Pri-safety Company Production
One-stop Fire system solution&equipment manufacture in China
PRI-SAFETY is professional manufacturer of Automatic fire suppression systems.
Main products are Vehicle Fire suppression system, Mining Machine Fire suppression system, FM200 Total Flooding Fire System, FK-5112 Total Flooding Fire System, Kitchen Hood Fire system, Water Mist Fire System, Foam Mist Fire System. and so on.Send Inquiry Now
PRI-SAFETY was established in 2016, specializes in the design, manufacture of automatic fire suppression systems and advanced fire
fighting equipment, national high-tech enterprise.
The main products are automatic fire suppression systems for vehicles and mechanical equipment, kitchen fire suppression system,
FM200 / Novec1230 total flooding systems, water mist fire system, foam sprinkler mist fire systems, and mobile compressed air foam
equipment. The products are used in mining, petrochemical,transportation, electric power, industry, construction and other fields. Since 2005, PRI-SAFETY has been OEM various automatic fire extinguishing systems for engineering, vehicles and industrial equipment for European and American customers. After more than ten years of technology accumulation, it has formed perfect and reliable system products. At present, our products have been exported to more than 40 countries and regions.
1. who are we?
We are based in Zhejiang, China, start from 2009,sell to South America(20.00%),Africa(15.00%),Mid East(15.00%),North
America(10.00%),Southeast Asia(10.00%),Western Europe(10.00%),Central America(10.00%),Southern Europe(10.00%). There are total
about 11-50 people in our office.
2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.what can you buy from us?
FM200 Fire System for Electrical Devices, Vehicle Automatic Fire System, Kitchen Automatic Fire System, CAFS Fire System,
Automatic Fire Tube, Stainless Steel Fire Extinguisher, Water Mist Fire System.
4. why should you buy from us not from other suppliers?
One Stop Fire Fighting Equipment supply and professional service. We have CE, EN671, EN1869 certificates. Mainly export to Europe,
Middle east, South America, Africa,etc.
5. what services can we provide?
Accepted Delivery Terms: FOB, CFR, CIF, EXW, Express Delivery;
Accepted Payment Currency: USD, CNY;
Accepted Payment Type: T/T,L/C,D/P D/A,Western Union,Cash;