Tube Type FE-36 Automatic Fire Suppression Extinguisher

Hangzhou PRI-SAFETY Fire Technology Co., Ltd. is known as one of the most professional manufacturers and suppliers of various safety products in China. If the tube type fe-36 automatic fire suppression extinguisher meets your requirement, welcome to buy quality equipment made in China here from our factory. Our factory will offer you one stop service and one year warranty.

Tube Type Automatic Fire Extinguisher Systems Filled with FE-36 for On-road Vehicles helps to protect vehicle engine compartments and vastly reduces the risk of fire spreading to other parts. The tube consists of a heat sensitive tube which is sealed at either end with stainless steel fittings.

The tube acts as both the storage medium and as the fire detector. The tube is unaffected by temperatures of up to 120 Degrees Centigrade but fire is of course much hotter and will cause the tube to burst, immediately extinguishing any nearby flames. The detection tube is filled with clean agent which is almost odourless discharges as a liquid instantly dispersing in the form of a gas and leaves no residue. Importantly the fluid itself does not conduct electricity or cause thermal shock damage.

Comparing with powder or foam agent,you get the additional benefit that after use there is no extinguishant residue and consequently none of the cleanup cost associated with foam and powder. The system requires no maintenance during its entire working life. It can be installed by any competent individual, and thus no training is required for installation.

Installation Precautions of Tube Type Automatic Fire Extinguisher Systems Filled with FE-36 for On-road Vehicles:

1) Do not use metal fastening materials for installation (steel clips, metalwires, etc.).
2) The installation shape of the pipe is irregular. According to the protection space, ensure that all spaces can be protected.
3) The automatic fire extinguishing tube installed in the engine room should not be close to the high temperature place
in the engine room.
4) The minimum bending radius is 25cm. When installing, do not bend excessively.
5) Please do not move the accessories of the fire extinguisher tube at will, such as the pressure gauge and the plug at the end.
6) If you find that the pressure gauge is a little loose, please tighten it in time. Do not deliberately loosen or force the pressure gauge and the plug at the end.

Tube Type Automatic Fire Extinguisher Systems Filled with FE-36 for On-road Vehiclesare used to protect the enclosed space, including but not limited to:
* Engine Compartments of Boats and Yachts.
* Engine Compartments of All On-Road Vehicles and Off-Road Vehicles: Car, Van, Bus, Mini Bus, Truck, Rally Car, Mining Machine or Construction Machine, etc.