Hangzhou PRI-SAFETY Fire Technology Co., Ltd. is known as one of the most professional manufacturers and suppliers of various safety products in China. If the 5.6mpa hfc227ea total flooding automatic fire suppression systems meets your requirement, welcome to buy quality equipment made in China here from our factory. Our factory will offer you one stop service and one year warranty.
5.6Mpa HFC227ea Total Flooding Automatic Fire Suppression Systems
1. Product Description:
HFC-227ea FM-200 Total Flooding Fire System, HFC-227ea FM-200 clean gas automatic fire suppression systems, HFC-227ea FM-200 fire extinguishing system Cabinet Type FM200 Fire Extinguisher
2. Components of Pipe Network FM200 Fire Suppression Systems
1. Storage cylinder: Cylinder, container valve (with pilot valve, pressure indicator), dip tube, etc.
2. Liquid check valve: Assure one way flow of fire suppression agent, to prevent backflow.
3. High pressure hose: Connect cylinder valve and liquid check valve .
4. Safety valve: Fitted on the manifold to relieve higher pressure.
5. Selection valve: Guide fire suppression agent into different distribution pipe network.
6. Starting gas bottle: Bottle, container valve, electromagnetic drive device, pressure gauge.
7. Gas check valve: Assure one way flow of starting gas, to prevent backflow.
8. Low leakage high sealing valve: For accumulated starting gas release so to avoid malfunction of system.
9. Discharge Nozzle: Fitted at the end of pipe network to discharge fire suppressing agent.
10. Control System: Control panel, smoke and heat detector, fire alarm, discharge indicator light, etc.
3. Advantage:
* Very swift fire suppression. Reach extinguishing level ≤10s.
* Safe to people. People is safe when exposed at the FM200 gas discharge level.
* Low extinguishing concentration. Nearly no obscure to vision in person evacuation.
* Easy to clean. No residue left, and minimize damage to sensitive equipment.
* Environment friendly. Zero ozone depletion potential and zero global warming potential.
* Simple installation, with small storage space.
4. Product Parameters
| Item | Model | Volume x Qty | Capacity (FM200) | Working Pressure (20ºC) | Max Working Pressure (50ºC) | Activate voltage/ current | Operating Temperature Range |
| 1 | GMQ4.2/90N-PRI | 90X1 | ≤100.8kg | 4.2Mpa | 5.6Mpa | DC24 V/1.2A | 0ºC-50ºC |
| 2 | GMQ4.2/120N-PRI | 120X1 | ≤134.4kg | 4.2Mpa | 5.6Mpa | DC24 V/1.2A | 0ºC-50ºC |
| 3 | GMQ4.2/150N-PRI | 150X1 | ≤168kg | 4.2Mpa | 5.6Mpa | DC24 V/1.2A | 0ºC-50ºC |
| 4 | GMQ4.2/180N-PRI | 180X1 | ≤201.6kg | 4.2Mpa | 5.6Mpa | DC24 V/1.2A | 0ºC-50ºC |
5. Working Principle:
When the control mode selection key on the automatic fire alarm and fire extinguishing controller is set to the "auto"position, the fire extinguishing system is under automatic control. When a fire occurs in the protection area, the temperature and smoke detectors will send out a fire signal through the automatic fire alarm and extinguishing control After the logic analysis of the device, it sends out a combined sound and light alarm signal, and sends out a linkage command at the same time to close the linkage device. After a delay, a fire extinguishing command is issued, the starting valve is opened to release the starting gas, and the starting gas is opened through the control gas pipeline valves and container valves release the fire extinguishing agent and implement fire extinguishing.
6. Product Applications:
MODEL ONE WITH ZONE VALVE
MODEL TWO WITHOUT ZONE VALVE
• Bank vaults
• Libraries
• Book stores
• Electronic data processing
• Telephone exchanges
• Communication centers • Transformer and switch room
• Control rooms
• Test laboratories
• Flammable liquid storage
7. Our workshop
8. Contact ways
