Hangzhou PRI-SAFETY Fire Technology Co., Ltd. is known as one of the most professional manufacturers and suppliers of various safety products in China. If the fm200 clean agent automatic firefighting system with fm200 solenoid valve meets your requirement, welcome to buy quality equipment made in China here from our factory. Our factory will offer you one stop service and one year warranty.
FM200 Clean Agent Automatic Firefighting System with FM200 Solenoid Valve
FM-200 / Hfc -227ea
FM-200 is an odorless, colorless, liquefied compressed gas. It is stored as a liquid and dispensed into the hazard as a colorless, electrically non-conductive vapor that is clear and does not obscure vision. It leaves no residue and has acceptable toxicity for use in occupied spaces at design concentration. FM-200 extinguishes a fire by a combination of chemical and physical mechanisms.
FM-200 does not work by displacing oxygen and is safe for use in occupied spaces without fear of oxygen deprivation.
Components of Pipe Network FM200 Fire Suppression Systems
3. High pressure hose: Connect cylinder valve and liquid check valve .
4. Safety valve: Fitted on the manifold to relieve higher pressure.
5. Selection valve: Guide fire suppression agent into different distribution pipe network.
6. Starting gas bottle: Bottle, container valve, electromagnetic drive device, pressure gauge.
7. Gas check valve: Assure one way flow of starting gas, to prevent backflow.
8. Low leakage high sealing valve: For accumulated starting gas release so to avoid malfunction of system.
9. Discharge Nozzle: Fitted at the end of pipe network to discharge fire suppressing agent. 10. Control System: Control panel, smoke and heat detector, fire alarm, discharge indicator light, etc.
* Low extinguishing concentration. Nearly no obscure to vision in person evacuation.
* Easy to clean. No residue left, and minimize damage to sensitive equipment.
* Environment friendly. Zero ozone depletion potential and zero global warming potential.
* Simple installation, with small storage space.
2. Working Principle
When the control mode selection key on the automatic fire alarm and fire extinguishing controller is set to the "auto"position, the fire extinguishing system is under automatic control. When a fire occurs in the protection area, the temperature and smoke detectors will send out a fire signal through the automatic fire alarm and extinguishing control After the logic analysis of the device, it sends out a combined sound and light alarm signal, and sends out a linkage command at the same time to close the linkage device. After a delay, a fire extinguishing command is issued, the starting valve is opened to release the starting gas, and the starting gas is opened through the control gas pipeline valves and container valves release the fire extinguishing agent and implement fire extinguishing.
Item | Model | Volume x Qty | Capacity (FM200) | Working Pressure (20ºC) | Max Working Pressure (50ºC) | Activate voltage/ current | Operating Temperature Range |
1 | GMQ4.2/90N-PRI | 90X1 | ≤100.8kg | 4.2Mpa | 5.6Mpa | DC24 V/1.2A | 0ºC-50ºC |
2 | GMQ4.2/120N-PRI | 120X1 | ≤134.4kg | 4.2Mpa | 5.6Mpa | DC24 V/1.2A | 0ºC-50ºC |
3 | GMQ4.2/150N-PRI | 150X1 | ≤168kg | 4.2Mpa | 5.6Mpa | DC24 V/1.2A | 0ºC-50ºC |
4 | GMQ4.2/180N-PRI | 180X1 | ≤201.6kg | 4.2Mpa | 5.6Mpa | DC24 V/1.2A | 0ºC-50ºC |
MODEL TWO : WITHOUT ZONE VALVE
• Control rooms
• Test laboratories
• Flammable liquid storage
• Bank vaults• Libraries
• Book stores
• Electronic data processing
• Telephone exchanges
• Communication centers Etc...
6. Packing&Shipping
7. Contact us
