Dry powder fire extinguisher 4.5kg ABC40
Product Description
Dry powder fire extinguisher with American Valve
•TUV CE0036 certificated, CE approved, ISO Certificated
•Suitable against class A, class B, class C, and live electrical fires
•All fire extinguishers must be serviced in accordance with BS5306
•Polyester powder external coating (Red, Yellow, Blue color Available)
•All fire extinguishers are tested no leakage.
•Chemical Agent: ABC40%, Pressured with nitrogen gas.
•Working Pressure: 14Bar; Test Pressure: 27Bar;
•All fire extinguishers must be serviced in accordance with BS5306
•Brand name: Pri-Safety
| Capacity | 4.5kg | ||
| Item No. | AP-4.5 | ||
| Out-dia.(mm) | Ф140 | ||
| Cylinder Length(mm) | 400 | ||
| Cylinder Weight (kg) | 2.2 | ||
| Extinguisher Weight(kg) | 7.5 | ||
| Volume(L) | 5.45 | ||
| Filled Weight(kg) | 4.5 | ||
| Temperature Range | -30+60ºC | ||
| Working Pressure(bar) | 14 | ||
| Testing Pressure(bar) | 27 | ||
| Min Wall-thickness | 1.13 | ||
| Fire Rate | 13A 89B C | ||
| Packing Size(mm) | 160x150x495 | ||
Application
Rules for Fighting Fires
Fires can be very dangerous and you should always be certain that you will not endanger yourself or others when attempting to put out a fire. For this reason, when a fire is discovered:
1.SOUND THE ALARM. If you discover or suspect a fire, sound the building fire alarm. If there is no alarm in the building, warn the other occupants by knocking on doors and shouting as you leave.
2.LEAVE THE BUILDING. Try to rescue others only if you can do so safely. Move away from the building and out of the way of the fire department. Don't go back into the building until the fire department says it is safe to do so.
3.CALL THE FIRE DEPARTMENT. Dial 911. Give as much information as possible to the emergency dispatcher.
Operations Instructions
1. Before attempting to fight a fire with a fire extinguisher it is important to check that it is fully charged (Fig. 1) and that the safety pin is not bent (Fig. 2)
2. Ensure you remain a safe distance from the fire and remove the safety pin (Fig.3) this will break the tamper seal
3. Aiming the extinguisher:
a) Solid Materials: Aim the hose at the base of the flames, moving across the area of the fire
b) Spilled liquids: Aim the hose at the near edge of the fire and with a rapid sweeping motion, drive the fire towards the far edge until all the flames have been extinguished
c) Flowing liquid: Direct the hose at the base of the flames and sweep upwards until all the flames have been extinguished
d) Electrical equipment: Switch off the power (if safe to do so) and then direct the hose straight at the fire
4. Squeeze the lever slowly to begin discharging the extinguisher, as the fire starts to diminish carefully move closer to it
5. Ensure all the fire has been extinguished, re-ignition can be possible when a powder fire extinguisher has been used
Production line