Automatic Tube Fire Extinguisher for Cars
Application Scope
The Tube Type Automatic Fire Systems are used to protect the Enclosed space, Including but not limited to:
1) Engine Compartments of Boats and Yachts;
2) Engine Compartments of All On-Road Vehicles and Off-Road Vehicles: Car, Van, Bus, Mini Bus, Truck, Rally Car, Mining Machine or Construction Machine, etc;
3) Electric Panel, Switch Board, Server Panel, .Control Box, etc.
How it work?
PRI-SAFETY Tube Type Automatic Fire Suppression system is a special polyamide tube, the out Dia.18mm, and different length as required, it is a compressed gas-extinguishing FM200(HFC-227ea) or FE-36(HFC-236fa), called Heptafluoropropane or Hexaflluoropropane too.
When Temperature reach 140° C, the softened tube burst one round hole to
release the extinguishing agent to extinguish the fire in very short time
Advantage:
1) Easy Installation
2) Clean Agent FM200 or FE-36
3) NO-TOXIC, Harmless to Humans
4) Environmentally Friendly
5) Small Volume
Technology Specification
Code | TFS-01 | TFS-02 | TFS-03 | TFS-04 |
Length x Dia | 1mx18mm | 2mx18mm | 3mx18mm | 4mx18mm |
Agent Capacity | 200g | 400g | 600g | 800g |
Agent Type | FM200 (HFC-227ea) Or FE-36(HFC-236fa) | |||
Material | Polyamide Tube | |||
Burst Temperature | 100° C, 120° C | |||
Working Temperature | -40° C~+90° C | |||
Shelf life of Systems | 5~8 years | |||
Installation
1. Open the box, and cut the cable ties carefully, don’t hurt the tube.
2. The packing kits include the cable ties and tube clamps(with rubber lining), please choose both or anyone for fixing the tube in the protected enclosed place.
3. Don’t use a metal fastening material for installation( Steel clamp, Metal Wire, etc.). The installation shape of the tube no rules, according to the protected space, ensure can protect all the space.
4. Don’t close to the high temperature part in the engine compartments.
5. The minimum bending Radius 250mm.