Hangzhou PRI-SAFETY Fire Technology Co., Ltd. is known as one of the most professional manufacturers and suppliers of various safety products in China. If the ul listed fk5112 total flooding fire system meets your requirement, welcome to buy quality equipment made in China here from our factory. Our factory will offer you one stop service and one year warranty.
Products Description

UL Listed FK5112 Fire Suppression System
The FK5112 Fire Suppression System is an advanced clean agent fire protection solution designed to provide fast, efficient, and reliable fire suppression for critical equipment and enclosed spaces.
Using FK5112 clean agent, the system extinguishes fires primarily by absorbing heat, rapidly reducing the temperature of the fire to stop combustion. It leaves no residue after discharge, making it ideal for protecting sensitive electrical and electronic equipment without causing secondary damage.
The system features a compact design, fast response, and automatic fire detection and suppression capabilities. It is suitable for applications where reliable fire protection and minimal equipment downtime are essential.
Key Features:
UL Listed fire suppression system.
Uses FK5112 clean agent, UL Listed
Fast and effective fire suppression.
No residue after discharge.
Electrically non-conductive agent.
Safe for protecting sensitive electronic equipment when properly designed and installed.
Minimal cleanup and reduced business interruption.
Automatic detection and suppression options.
Suitable for enclosed spaces and critical equipment protection.
Working Principle
Woring Principle:
FK5112 Total Flooding System with Steel Cylinder and Stainless Steel Cylinder are generally used in conjunction with fire detectors, fire alarm fire extinguishing controllers, emergency start/stop buttons, sound and light alarms, deflation indicators and other fire fighting equipment. When a fire occurs in the protection area, the temperature and smoke detectors will send out a fire signal. After the logic analysis of the automatic fire alarm and extinguishing controller, it will send out a sound and light composite alarm signal, and at the same time send out a linkage command to turn off the linkage equipment. After a delay time, a fire extinguishing command is issued, the solenoid valve driver is opened, the container valve is opened, the fire extinguishing agent is released, and the fire is extinguished; if the duty officer discovers a fire, he can press the emergency start button outside the protective area door to implement the fire extinguishing operation ; There is also a manual button on the solenoid valve driver, and mechanical emergency manual operation can also be used to extinguish fire in an emergency.


Speficication
- ---1. Specification of Cylinder
Steel cylinder and Stainless steel cylinder
Cylinder's Specificaiton

| Item | Certification | Cylinder Capacity |
| 1 | TPED | 16.6~210L |
| 2 | GB | 20~210L |
| 3 | DOT | 16.7~210L |
| 4 | TPED Seamless Cylinder | 20~140L |
---2. Specification of Valve
Normally it has 3 model valve,
hEAD VALVE

| Type |
33mm 25Bar |
33mm 42Bar |
49mm 25Bar | 49mm 42Bar |
| Body Material | Brass | Brass | Brass | Brass |
| Applicable Systems | 25Bar | 34.5Bar & 42Bar | 25Bar | 34.5Bar & 42Bar |
| Nominal Working Pressure | 25Bar @21℃ | 34.5Bar & 42Bar @21℃ | 25Bar @21℃ | 34.5Bar & 42Bar @21℃ |
| Safety Relief pressure(Brust Disc Rating) | 60±6Bar | 100±10Bar | 60±6Bar | 100±10Bar |
| Working Temperature | -20℃~60℃ | -20℃~60℃ | -20℃~60℃ | -20℃~60℃ |
| Inlet | 2.5''-12UN | 2.5''-12UN | 3'-12UN | 3'-12UN |
| Outlet | 1.875''-12UN | 1.875''-12UN | 2.5''-12UN | 2.5''-12UN |
| Actuator Port | G1 | G1 | G1 | G1 |
| Pilot Pipe Connection | G1/8 | G1/8 | G1/8 | G1/8 |
| Pressure Gauge Port | NPT1/8 | NPT1/8 | NPT1/8 | NPT1/8 |
| Weight | 4.5kg | 4.5kg | 9.0kg | 9.0kg |
Solenoid Valve

| Material |
Body: Mild Steel Swivel Nut: Brass Manual Button: ABS Limit Pin: Stainless Steel |
| Electrical/Electronic Configurations |
Voltage Supply: 24VDC Current Supply: 0.50A Monitroing Current: <30mA Reverse Polarity Compatible Via Bridge Rectifier Circuit. Supervisory Switch(N.C.) internal to Actuator. |
| Mechanical Configurations |
Nominal Pin Movement: 4.5mm Connection: G1 Female Overall Size: 128mm x 45mm Min Force Provided: 53N Max Manual Actuation Force: 150N |
| Actuation Type | Latching |
| Reset Method | Manually Via Reset Tool Supplied |
| Working Temperature | -20℃ to 55 ℃ |
| Weight | 1.0kg |
| Factory Test | 100% Check on Start/Finish Position |
| Approvals | UL S24176 |
pneumatic Actuator

| Material | Brass |
| Max Working Pressure | 60Bar |
| Min Actuation Pressure | 4Bar |
| Install Thread | G1 Female |
| Pneumatic Port | G1/8 Female |
| Work Temperature | -20℃ ~ 60℃ |
| Weight | 0.5kg |
| Install Torque | -15 Nm |
nOZZLE

| Item | DN25 | DN32 | DN40 | DN50 |
| Code No. | N25-PRI | N32-PRI | N40-PRI | N50-PRI |
| Thread | RC 1'' | RC 1-1/4'' | RC 1-1/2'' | RC 2'' |
| Material | Brass | |||
---Control Panel and Fire Alarm System
For PRI-SAFETY FM200 Total Flooding Fire System, the Control Panel And Fire Alarm System contain addressable control panel, smoke detector, heat detector, manual/auto switch, emergency start/abort button, discharge indicator light, I/O Module, Alarm(Siren/Light).

Production

Packing

Company Profile

We are always at your service when you need
PRI-SAFETY specializes in the manufacture and exportation of Automatic Fire Systems, FM200/FK5112 Total Flooding Fire System, Automatic Tube Fire Extinguisher, Throw Type Fire Extinguishers, CAFS Compressed Air Foam Fire Systems, Fire Extinguishers and other fire equipment, etc. We focus on providing one-stop fire-fighting products and professional service.
We have attained ISO9001:2000, CE, UN ECE R107. Almost all products that we provide are manufactured and tested according to the international standard. We also supply OEM service, we can design and produce the products as client's special request.
PRI-SAFETY also has very good after-sales service, we have one professional,high efficient and warmly sales team. We promise that all feedbacks from clients would be replied within 8 hours during working days. We always try our best to provide better service to meet our clients' demands.
Our company rule is saving time and cost for clients, taking good profit and well development for clients. We supply well growing space and training for each staff, help staffs to achieve their dreams. Then clients and staffs push our company development.expert instructors

