Gas Fire Extinguishing Automatic Control Method

When the control mode selection button on the gas fire extinguishing controller is turned to the "automatic" position, the fire extinguishing system is in the automatic control state. When the fire occurs in the protection zone, the fire detector sends a fire signal, and the alarm fire extinguishing controller emits an audible and visual alarm. Signal, at the same time issue linkage command, close the interlock device, after a delay time, issue a fire extinguishing command, open the solenoid valve to release the starting gas, start the gas through the starting pipe to open the corresponding selector valve and the container valve (the bottle head valve), release the fire To carry out fire fighting.