Mechanical Emergency Manual Operation

When a fire occurs in the protected area and the controller cannot issue a fire extinguishing command, the relevant personnel should be notified to evacuate the site, close the linkage device, and then pull out the manual safety clip card on the starter bottle of the corresponding start bottle group, and press the handle to open the start valve. When the starting gas is released, the selection valve, the container valve (the bottle head valve), the extinguishing agent can be released, and the fire extinguishing can be carried out. In this case, when the start valve is repaired or the starter gas in the cylinder is not enough to work, the selector valve handle of the corresponding fire extinguishing area should be opened first, the pressure arm is opened, the selector valve is opened, and the container valve of the area is opened. The manual handle on the head valve opens the container valve (bottle valve), releases the extinguishing agent, and extinguishes the fire.